Resiblock 22
Known As The Best Paving Sealant in the World
For Concrete, Cement & Clay Pavers
Unsure of what type of paver you have? Click here to find your paving match.
Resiblock 22 is a urethane-based paving sealant. Its advanced formulation allows the urethane to penetrate the capillaries of the paved material, so it not only coats the pavers but also becomes a part of its material structure. Additionally, the urethane stabilises the jointing material between pavers, waterproofing, binding, and hardening it while preserving the flexibility of the paving. For more detailed information, click here.
5 litre
R1380,00 Incl. VAT
Resiblock 22
Paving Sealant Suitable for Dry-cast Concrete Products
Resiblock 22 is a urethane-based paving sealant. Its advanced formulation allows the urethane to penetrate the capillaries of the paved material, so it not only coats the pavers but also becomes a part of its material structure. Additionally, the urethane stabilises the jointing material between pavers, waterproofing, binding, and hardening it while preserving the flexibility of the paving. For more detailed information, click here.
5 litre
Coverage: ± 2-6m² / L (depending on pavers & joint width)
R1380,00 Incl. VAT
- Enhances the colour
- Repels water, grease, and oil
- Protects against UV degradation
- Hardens jointing sand
- Maintains good interlock
- Prevents insect and pest intrusion
- Long-lasting (between 7 – 10 years)
Coverage could be anything between 1-6m² per litre.
Why so vague?
- The actual coverage depends on the type of paving material, its age, porosity, jointing material, joint widths, and even bedding material. The degree of joint stabilising required, will also greatly influence the consumption.
- We recommend purchasing one 5L container, initially to apply in real life conditions. From there, you could more accurately calculate quantities required.
Should you require any assistance, please contact us.
| Size | 5L |
| Weight | 5kg |
| Dimensions | 175 x 110 x 93mm |
What tools are needed?
- Watering can with Rose Head (Rose Head is important)
- Paint Roller or Squeegee
- Gloves
- Safety Goggles
Notes to keep in mind:
- Make sure the surface and jointing sand are thoroughly dry and free from any dirt.
- Ensure that Resiblock 22 is only applied when there is no chance of rain withing the next 24 hours.
- Do not apply in extreme temperature (below 3°C or above 30°C)
- Ensure paving is thoroughly swept and that no jointing sand remains in the chamfers of the pavers.
- Accurate application rates are critical to ensure full joint stabilisation (typically 1 litre/2m² when treating both paver and joint).)
- A minimum of 3 hours and a maximum of 24 hours between the first and second coats. Two coats are recommended to prevent fuel/water infiltration. Only one coat is needed when applying on clay pavers.
- Avoid walking on the sealed area for 3 hours after application and do not drive motor vehicles on the surface for 24 hours.
- Always wear protective gloves and goggles. No smoking. Wear a mask when working in confined areas.
- Allow Resiblock 22 to soak into your jointing gaps to absorb deep enough for maximum results.
Application Process:
- Pour your Resiblock 22 into your watering can.
- Sprinkle onto surface area where Resiblock 22 is required
- Spread the solution across the paving using a paint roller or squeegee.
Application Process:
- Pour your Resiblock Resiecco into your watering can.
- Sprinkle onto the surface area where Resiecco is required.
- Spread the solution across the paving using a paint roller or squeegee.
To view an application video, click here – https://youtu.be/jqgWMimj7ZM
Reviews
There are no reviews yet.